Samsung Galaxy S26 Ultra Size & Specs – Will S25 Ultra Cases Fit?

How to Properly Clean Your AirPods Case？ Reading Samsung Galaxy S26 Ultra Size & Specs – Will S25 Ultra Cases Fit? 8 minutes Next Apple Watch Band Sizes Guide: Choosing the Right Fit for Your Wrist

Feb 27, 2026

Will S25 Ultra Cases Fit the S26 Ultra

No. Galaxy S25 Ultra cases are not compatible with Galaxy S26 Ultra.

Although the two phones look very similar, small differences in dimensions, camera layout, and button placement affect case compatibility.

Button alignment
Camera cutout position
Speaker openings
Wireless charging compatibility
Overall protection

The Galaxy S26 Ultra is slightly taller and wider than the Galaxy S25 Ultra, while being slightly thinner. In addition, the camera module design has also changed, which affects the position and size of the camera opening.

Because of these differences, a Galaxy S25 Ultra case may not install correctly on the Galaxy S26 Ultra or provide proper protection. For the best fit, button response, and camera protection, you should choose a case specifically designed for the Galaxy S26 Ultra.

Samsung Galaxy S26 Ultra dimensions and specifications

Size and Weight: According to currently released official data, the Samsung Galaxy S26 Ultra measures 163.6mm x 78.1mm x 7.9mm (height x width x thickness) and weighs 214g. Weight may vary slightly depending on the region due to internal configuration differences.

Screen size and aspect ratio: According to official data, the Samsung Galaxy S26 Ultra has a 6.9-inch screen, with an actual viewable area of approximately 6.7 inches, excluding the rounded corners and the front-facing camera cutout. The screen aspect ratio is approximately 19.5:9, and the screen resolution is 3120x440 pixels.

Samsung Galaxy S25 Ultra dimensions and specifications

Size and weight: According to the official website, the Samsung Galaxy S25 Ultra has a body size of 162.8mm*77.6mm*8.2mm (height x width x thickness) and weighs approximately 218g.

Screen size and aspect ratio: The Samsung Galaxy S25 Ultra has a 6.9-inch screen with a resolution of 1440x3120 pixels and an aspect ratio of 19.5:9.

Galaxy S26 Ultra vs S25 Ultra Dimensions Comparison：

Parameter	S25 Ultra	S26 Ultra	Difference
High	162.8mm	163.6mm	+0.8 mm
Width	77.8mm	78.1mm	+0.3 mm
Thickness	8.2mm	7.9mm	-0.3 mm
Screen size	6.9 inches	6.9 inches	+0.0 inches

Are Galaxy S25 Ultra and S26 Ultra the Same Size?

No, Galaxy S25 Ultra and Galaxy S26 Ultra are not exactly the same size.

The Galaxy S26 Ultra is slightly taller and wider, while being slightly thinner than the Galaxy S25 Ultra. Although the difference is small, phone cases require precise measurements, so the two models do not share the same case compatibility.

Why S25 Ultra Cases Don't Fit S26 Ultra

The Galaxy S25 Ultra and Galaxy S26 Ultra cannot share the same case because phone cases are designed around precise hardware measurements. Even small differences in body dimensions, camera layout, and button placement can affect the overall fit.

The main compatibility differences include:

Camera Cutout and Lens Protection

The Galaxy S26 Ultra features a slightly different camera module design compared with the Galaxy S25 Ultra. A case designed for the S25 Ultra may not align correctly with the S26 Ultra camera area, which can reduce lens protection or block part of the camera opening.

Button Alignment

Phone cases are made with exact openings for the power and volume buttons. Since the Galaxy S26 Ultra has slight changes in body dimensions, an S25 Ultra case may cause the buttons to feel misaligned, harder to press, or less responsive.

Wireless Charging and Accessories

Case design can affect wireless charging performance and accessory compatibility. A case that does not match the Galaxy S26 Ultra’s dimensions may interfere with magnetic accessories or prevent a secure connection.

Overall Protection and Fit

A properly fitted case should hold the phone securely and protect vulnerable areas such as the corners, edges, and camera module. An S25 Ultra case used on an S26 Ultra may leave gaps, fit loosely, or fail to provide the intended protection.

For the best fit, button response, camera protection, and accessory compatibility, choose a case specifically designed for the Samsung Galaxy S26 Ultra.

Do You Need a New Galaxy S26 Ultra Case?

If you are upgrading from Galaxy S25 Ultra to Galaxy S26 Ultra, purchasing a new case is recommended.

A dedicated Galaxy S26 Ultra case provides:

Accurate camera protection
Proper button access
Better drop protection
Full compatibility with wireless charging accessories

What kind of phone case would be suitable for the Samsung Galaxy S26 Ultra?

Daily protection performance & material selection

For a phone case, the most important aspect is its daily protective performance. Before buying a phone case, after confirming the model number, you should find out what material it's made of. By choosing the right material, you can select a phone case that better matches your preferences.

Different materials offer different advantages for phone cases. For example, TPU and silicone phone cases can easily meet basic daily protection needs, protecting your phone from external scratches. TPU+PC phone cases can further enhance the phone's drop resistance. Aramid fiber phone cases are suitable for users who prefer the feel of a bare phone, as they are thin and feel almost weightless when worn. Vegan leather phone cases are suitable for customers who like the feel of leather, as they are more skin-friendly.

Lens protection

Besides protecting the entire phone, protecting the lens is also crucial. Therefore, when choosing a phone case, you should pay attention to whether it has lens protection.

Full-coverage lens protection phone cases absorb external impacts when the phone is dropped, ensuring the lens is not damaged. Partial-coverage phone cases, on the other hand, raise the lens area, using a spring-loaded design to cushion the impact on the lens when the phone is dropped.

Magnetic accessories

The Samsung Galaxy S26 Ultra supports wireless charging up to approximately 25W, offering an overall improvement in charging speed compared to its predecessor, the Samsung Galaxy S25 Ultra.However, the Samsung Galaxy S26 Ultra still lacks a built-in magnetic ring, so even with Qi2 support, the phone itself cannot be magnetically aligned.

Therefore, when choosing a phone case, you should select one with a magnetic ring to assist the Samsung Galaxy S26 Ultra in achieving Qi2's magnetic alignment wireless charging function. The magnetic ring on the phone case helps the Samsung Galaxy S26 Ultra to magnetically charge, similar to MagSafe automatic magnetic alignment function.

Best Galaxy S26 Ultra Cases from aulumu

For the Samsung Galaxy S26 Ultra , aulumu currently offers two phone cases: a TPU shockproof case and an aramid fiber case.

aulumu Galaxy S26 Ultra TPU Phone Case

TPU is one of the most commonly used materials for phone cases at aulumu, and a TPU phone case was also released for the Samsung Galaxy S26 Ultra. It features a unibody TPU full-coverage design, effectively cushioning against external wear and impacts. The lens area uses an aluminum frame lens hood design, with the protruding aluminum frame ready to protect your phone's camera lens at any time.

The pattern on the back uses a double-layer IMD process to maintain its clarity and prevent wear. Meanwhile, the lines on the back and the magnetic ring also use luminescent material, which absorbs light to create a beautiful glow in low-light environments. The magnetic ring design also helps you activate the Qi2 function on the Samsung Galaxy S26 Ultra. The side buttons are made of metal, providing a realistic tactile feel.

aulumu S26 Frosted Glow Case

aulumu Galaxy S26 Ultra Aramid Fiber Phone Case

In addition to TPU phone cases, aulumu also offers a Samsung Galaxy S26 Ultra case made of aramid fiber.

Utilizing aerospace-grade aramid fiber, it's lightweight yet incredibly durable, offering both phone protection and a slim design. The rear heat dissipation structure allows the phone to cool itself even under heavy use, while the temperature-sensitive heatsink provides a clear and intuitive view of the phone's temperature. The raised aluminum camera frame offers enhanced protection for the lens, ensuring safer use. Furthermore, the case features a built-in magnetic ring, compatible with most wireless chargers and magnetic accessories.

Conclusion

Before choosing a phone case, it's helpful to know the size of the case you're using. While different models of the same series of phone cases may have similar appearances, there can be slight differences in size and other details. By comparing sizes, we can see that the Samsung Galaxy S25 Ultra case is not compatible with the Samsung Galaxy S26 Ultra. Therefore, it's essential to choose a Samsung Galaxy S26 Ultra case that corresponds to the correct model to provide precise protection for your phone.

FAQs

Will Samsung Galaxy S25 Ultra cases fit the Galaxy S26 Ultra?

No, it is not recommended. Aulumu S26U cases are designed specifically for the Samsung Galaxy S26 Ultra and are not shared with the S25 Ultra. The S26 Ultra and S25 Ultra differ in height, width, thickness, camera module layout, and corner profile, which can cause an old case to feel loose or misaligned around the camera, buttons, ports, and edges. For S26 Ultra, choose the Aulumu S26U Frosted Glow Case or S26U Ultra-Slim Aramid Fiber Case.

Are the Samsung Galaxy S26 Ultra and S25 Ultra the same size?

Not exactly. In Aulumu’s comparison, the S26 Ultra measures approximately 163.6 × 78.1 × 7.9 mm, while the S25 Ultra measures approximately 162.8 × 77.6 × 8.2 mm. The difference may look small, but a phone case must precisely match the camera, buttons, S Pen, charging port, speaker holes, and corner curves. Similar size does not mean cross-compatibility. For a safer fit, use a dedicated Samsung Galaxy S26 Ultra case.

What materials are best for S26 Ultra cases?

Aulumu currently gives S26 Ultra users two clear directions: the S26U Frosted Glow Case and the S26U Ultra-Slim Aramid Fiber Case. The Frosted Glow Case uses an integrated TPU full-wrap structure, dual-layer IMD process, glow-in-the-dark lines, metal buttons, and an aluminum camera frame, making it stronger for daily protection, scratch resistance, and anti-slip handling. The Aramid Fiber Case uses a 1.2 mm aramid fiber body, weighs about 27g, and includes a CoolHyper Cooling Structure with a temperature indicator, making it better for users who want a lighter, more technical feel with magnetic compatibility and assisted heat dissipation.

Are third-party cases compatible with the Samsung Galaxy S26 Ultra?

Yes, but only if the case is clearly made for Samsung Galaxy S26 Ultra. A qualified third-party case must precisely match the S26 Ultra camera island, S Pen, buttons, charging port, speaker cutouts, and corner shape. To reduce fit risk, the Aulumu S26U Frosted Glow Case and S26U Ultra-Slim Aramid Fiber Case are more direct choices because they are developed around the S26 Ultra structure and include built-in magnets for wireless charging and Samsung PowerShare.

Do I need a new case when upgrading to the Galaxy S26 Ultra?

Yes. After upgrading to the Galaxy S26 Ultra, choose a case designed specifically for the S26 Ultra. The Aulumu S26U Frosted Glow Case is better for users who want full-wrap TPU coverage, anti-slip edges, glow visual details, and stronger daily cushioning. The S26U Ultra-Slim Aramid Fiber Case is better for users who want a thin, lightweight feel, aramid fiber texture, magnetic compatibility, and CoolHyper-assisted heat management.